Ram Mounts RAM CAMERA – THREAD POST BASE 1/4-20 * ROUND BASE

The RAM Mounts Camera Thread Post Base 1/4-20 Round Base (RAP-B-366U) is an adhesive camera mounting platform that combines a standard 1/4-20 camera thread post with RAM’s 1″ ball system. This camera mount enables riders to attach action cameras, compact cameras, or any device with a 1/4-20 threaded mount to motorcycle fairings, helmets, or body panels using a round adhesive base, while maintaining compatibility with RAM arms for adjustable positioning.

Technical Specifications

Key Features

Universal 1/4-20 Camera Thread: Standard tripod thread compatibility works with action cameras using tripod adapters, compact cameras, POV cameras, and any photography equipment that uses the industry-standard 1/4-20 mounting thread.

3M VHB Adhesive Round Base: Industrial-strength 3M VHB (Very High Bond) adhesive pad provides permanent mounting to smooth surfaces including motorcycle fairings, windscreens, helmet shells, and fuel tanks without drilling holes.

Integrated 1″ RAM Ball: Built-in rubber ball connects to RAM socket arms and mounts, allowing camera angle adjustment and compatibility with existing RAM mounting ecosystems for multi-position camera setups.

Low-Profile Design: Compact round base minimizes aerodynamic drag and visual impact on motorcycle bodywork compared to bulky clamp-style camera mounts.

Use Case Scenarios

• Action camera mounting on motorcycle fairings for forward-facing ride footage without helmet mounting discomfort or additional wind resistance
• Helmet-mounted POV camera setups where 1/4-20 thread adapters provide more secure attachment than adhesive camera mounts alone, especially for full-face helmets
• Compact camera mounting on adventure bike panniers or top cases for scenic touring photography with quick-detach capability via threaded connection

Why Choose the RAM Camera Thread Post Base 1/4-20?

• 3M VHB adhesive creates bond strength exceeding mechanical fasteners on smooth surfaces, surviving high-speed wind loads and vibration without drilling motorcycle bodywork
• Combines camera industry-standard 1/4-20 thread with RAM’s ball ecosystem, allowing cameras to connect to the same arms and sockets used for phone mounts or GPS units
• Round base profile distributes adhesive load evenly and provides cleaner appearance than rectangular adhesive pads that collect dirt at corners
• Enables permanent camera mount locations on fairings while maintaining camera portability via threaded quick-release when you want to remove cameras at stops

Pros & Considerations

Pros:

• No-drill installation preserves motorcycle bodywork and paint, critical for riders who want camera mounting without permanent fairing modifications
• Universal 1/4-20 thread works with action cameras using tripod adapters and directly with compact cameras, providing broader device compatibility than GoPro-specific adhesive mounts
• RAM ball integration allows connection to adjustable arms for precise camera angle control instead of fixed-position adhesive-only mounts

Considerations:

• Adhesive base requires smooth, clean surface – textured fairings, carbon fiber weave, or porous materials may not provide adequate bond strength
• 3M VHB adhesive is designed for permanent installation – removal may leave residue or damage paint, so test placement carefully before final mounting

Frequently Asked Questions

Q: Will this work with GoPro or other action cameras?

A: Yes, when used with a GoPro tripod adapter (which converts GoPro’s 3-prong mount to 1/4-20 thread). Most action cameras either have native 1/4-20 threads or offer tripod adapters that screw into this mount’s thread post.

Q: How strong is the 3M adhesive – will it hold at highway speeds?

A: 3M VHB adhesive used on this base is rated for permanent outdoor installations and creates bonds stronger than mechanical fasteners on smooth surfaces. It withstands highway wind loads and vibration when properly applied to clean, smooth fairing surfaces. Allow 24 hours cure time before riding.

Q: Can I remove this base later if I want to change camera position?

A: 3M VHB adhesive is designed for permanent installation. Removal is possible using heat (hair dryer) and fishing line to cut through the adhesive, but it may damage paint or leave residue requiring adhesive remover and polishing. Plan mounting location carefully before installation.

Q: What surface preparation is needed before mounting this base?

A: Clean the mounting surface thoroughly with isopropyl alcohol to remove all dirt, wax, and oils. Ensure surface is completely dry. Surface temperature should be above 20°C (68°F) for optimal adhesive bond. Press base firmly for 30 seconds, then allow 24 hours before attaching camera or riding.

Q: Can I connect this to RAM phone mount arms for adjustable camera positioning?

A: Yes, the integrated 1″ ball fits any RAM B-size socket, including short arms, double-socket arms, or extension arms. This allows you to position the camera away from the base using RAM arms, then screw your camera onto the 1/4-20 thread for adjustable angle control.

Shop the RAM Mounts Camera Thread Post Base 1/4-20 Round Base at Custom Elements with fast shipping across India. Complete your riding setup:

• Action Cameras to pair with this mounting base for ride recording
• RAM Mount Arms for adjustable positioning between the base and your camera
• Full-Face Helmets with smooth shell surfaces ideal for adhesive camera base mounting

Adhesive camera mounting transforms your motorcycle into a mobile filming platform without drilling fairings or compromising resale value.