RAM Mounts Tough-Claw™ Medium Clamp Base with Ball

The RAM Mounts Tough-Claw™ Medium Clamp Base is a mid-size clamp mounting system designed to attach securely to bars and tubes ranging from 1″ to 2.25″ in diameter. Featuring rubber-lined grip surfaces and an integrated 1″ RAM ball, this medium-size claw bridges the gap between small standard handlebars and oversized crash bars, providing stable mounting for devices on thicker bars, engine guards, and auxiliary tubing without permanent installation.

Technical Specifications

Key Features

Mid-Range Clamp Diameter Coverage: Accommodates bars from 1″ to 2.25″ diameter, fitting thicker handlebars, crash bars, highway bars, and engine guards that exceed standard handlebar sizes but don’t require the large clamp.

Rubber-Lined Claw Grips: High-density rubber pads line the claw opening to protect chrome, powder-coated, and painted finishes while providing superior friction grip that resists rotation under vibration and impact.

Marine-Grade Aluminum Construction: Powder-coated aluminum body engineered to withstand continuous exposure to rain, road salt, temperature swings, and UV radiation without corroding or weakening.

Adjustable Clamping Force: Hex bolt tightening mechanism allows precise control over clamping pressure – secure enough for high-vibration environments, gentle enough to avoid damaging thin-walled decorative tubing.

Use Case Scenarios

• Mounting GPS units or smartphones on adventure bike crash bars and auxiliary light bars in the 1.25″ to 2″ diameter range
• Installing action cameras on cruiser highway bars or engine guards for low-angle riding footage
• Attaching device mounts to touring bike wind deflector brackets or thicker aftermarket handlebar risers

Why Choose the RAM Tough-Claw Medium?

• Sweet spot sizing fits the widest variety of motorcycle auxiliary bars – thicker than handlebars but not oversized custom tubing
• Ideal for adventure bikes and touring bikes with factory crash bars and engine protection bars
• No-drill installation preserves OEM equipment and allows repositioning as device needs change
• Backed by RAM Mounts’ lifetime warranty against manufacturing defects

Pros & Considerations

Pros:

• Fits most aftermarket crash bars, engine guards, and highway bars found on adventure and touring motorcycles
• Overlap with small clamp range (1″ to 1.5″) means it works on standard bars if you prefer the extra clamping surface area
• Rubber padding prevents finish damage on expensive powder-coated or chrome-plated crash bars

Considerations:

• Larger physical size than the small clamp – verify adequate clearance around controls, cables, and bodywork before purchase
• Will not fit standard 7/8″ handlebars (minimum 1″ diameter required) – use small Tough-Claw for thinner bars

Frequently Asked Questions

Q: How do I know if I need the medium clamp versus small or large?

A: Measure your bar diameter where you plan to mount the clamp. Small fits 0.625″ to 1.5″, Medium (this model) fits 1″ to 2.25″, and Large fits 1.87″ to 3″. Most adventure bike crash bars and highway bars fall in the 1.25″ to 1.75″ range, making Medium the best choice. When in doubt and your bar is in the overlap range, choose the smaller size for more compact installation.

Q: Can I mount this clamp on irregular-shaped or oval tubing?

A: The Tough-Claw is designed for round tubing. It can accommodate slightly oval tubing if the minor (narrowest) diameter is at least 1″ and the major (widest) diameter does not exceed 2.25″. The rubber pads conform somewhat to irregularities, but severely oval or square tubing will not clamp securely.

Q: Will this clamp fit BMW GS crash bars?

A: Most BMW R1200GS, R1250GS, and F850GS factory and aftermarket crash bars use tubing in the 1.25″ to 1.5″ diameter range, which falls within this clamp’s capacity. Measure your specific crash bar to confirm, as some aftermarket options use thicker tubing.

Q: How much torque should I apply when tightening the clamp bolt?

A: RAM does not specify a torque value. Tighten the hex bolt by hand with a hex key until the clamp feels snug and cannot be rotated by hand with moderate force. Over-tightening can deform the rubber pads or crush thin-walled tubing. Check tightness after the first 100-200 km and periodically thereafter.

Q: Can I use this clamp on painted or chromed bars without scratching them?

A: Yes. The non-marring rubber pads are specifically designed to protect finished surfaces. Proper installation per RAM instructions will not scratch chrome, powder coat, anodizing, or paint. Avoid over-tightening and ensure no dirt or debris is trapped between the rubber pads and the bar.

Shop the RAM Mounts Tough-Claw Medium Clamp Base at Custom Elements with fast shipping across India. Complete your riding setup:

• RAM mounting arms and device cradles
• Tank bags and touring luggage systems
• Riding jackets with phone-accessible pockets

The Tough-Claw Medium brings RAM’s proven mounting technology to the mid-size bars found on adventure tourers, cruisers, and accessory-equipped motorcycles across India.