RAM Mounts Tough-Claw Small Clamp Base with Ball

The RAM Mounts Tough-Claw™ Small Clamp Base is a compact clamp mounting system designed to attach securely to bars and tubes ranging from 0.625″ to 1.5″ in diameter. Featuring rubber-lined grip pads and an integrated 1″ RAM ball, this small-size claw provides versatile mounting options for devices on standard handlebars, mirror stalks, roll bars, or other small-diameter tubing without drilling or permanent modification.

Technical Specifications

Key Features

Compact Clamp for Standard Bars: Fits bars from 0.625″ to 1.5″ diameter, making it ideal for most motorcycle handlebars (7/8″ and 1″), mirror stalks, auxiliary light bars, and small-diameter roll bars or tubing.

Rubber-Lined Claw Grips: High-density rubber pads protect chrome, painted, and anodized finishes while providing superior grip that prevents rotation under vibration and road shock.

Marine-Grade Aluminum Construction: Powder-coated aluminum body resists corrosion from rain, humidity, and salt exposure, maintaining structural integrity through years of outdoor use.

Tool-Free Repositioning: Once initially adjusted with a hex key, the clamp can be loosened, repositioned, and retightened by hand in seconds for quick device angle changes or seasonal remounting.

Use Case Scenarios

• Mounting smartphones or GPS units on standard 7/8″ or 1″ motorcycle handlebars for navigation
• Installing action cameras on mirror stalks or small auxiliary bars for unique filming angles
• Attaching device mounts to bicycle handlebars or small-diameter roll bars on utility vehicles

Why Choose the RAM Tough-Claw Small?

• Most versatile RAM clamp for standard motorcycle handlebars and common bar diameters
• Smaller footprint than medium or large clamps reduces interference with controls and cables
• No-drill installation allows mounting on rental bikes, demo bikes, or anywhere permanent modification is prohibited
• Backed by RAM Mounts’ lifetime warranty against manufacturing defects

Pros & Considerations

Pros:

• Perfect fit for standard 7/8″ and 1″ handlebars found on most sport bikes, nakeds, and adventure bikes
• Compact design allows mounting close to controls without blocking clutch or brake lever access
• Rubber pads protect expensive chrome or custom-painted handlebars from scratching

Considerations:

• Maximum 1.5″ diameter – will not fit oversized cruiser bars or large crash bars (use medium or large Tough-Claw instead)
• On very thin bars (under 0.75″), verify the clamp closes fully without bottoming out – extremely thin bars may need shims

Frequently Asked Questions

Q: Will this fit my motorcycle’s handlebars?

A: Most motorcycles use 7/8″ (22mm) or 1″ (25.4mm) diameter handlebars, which fall well within this clamp’s 0.625″ to 1.5″ range. Measure your handlebar diameter with calipers or a tape measure to confirm. Cruisers with oversized bars may require the medium or large Tough-Claw.

Q: Can I mount this on my clutch or brake reservoir perch?

A: Yes, if the perch diameter is within the 0.625″ to 1.5″ range and there is sufficient straight tubing to accommodate the clamp width (approximately 2″ of clear space needed). Ensure the clamp does not interfere with lever operation or cable routing.

Q: How do I prevent the clamp from rotating or sliding during rides?

A: Tighten the hex bolt firmly until the rubber pads compress slightly and the clamp cannot be rotated by hand. The rubber grip naturally resists vibration loosening. For high-vibration bikes or off-road use, check tightness every 500-1000 km and re-tighten if needed.

Q: What RAM arm should I use with this clamp for phone mounting?

A: The most common setup pairs this clamp with a short double socket arm like the RAM-B-201U (2.75″ arm) and an X-Grip or Quick-Grip phone holder. This creates a compact mounting solution that keeps your phone close to the bars for easy viewing and touch access.

Q: Can I use this clamp on bicycle handlebars?

A: Yes. Standard bicycle handlebars are typically 0.875″ to 1″ in diameter, which is within this clamp’s range. The marine-grade construction is overbuilt for bicycle use, making it extremely durable for bikepacking, touring, or commuter setups.

Shop the RAM Mounts Tough-Claw Small Clamp Base at Custom Elements with fast shipping across India. Complete your riding setup:

• RAM mounting arms and phone holders
• Bluetooth systems for turn-by-turn navigation
• Touchscreen-compatible riding gloves

The Tough-Claw Small delivers RAM’s professional-grade mounting reliability in a compact package designed for the bars and tubing found on most motorcycles across India.